This is a lightened factory steel flywheel for SOHC engines mated to X1/9 and Strada/Ritmo/Uno style 5-Spd transaxles.
Includes the 5-Spd style ring gear.
Notice the clutch plate bolt pattern; using larger bolts and clutch cover / friction disc than 4-Spd style flywheels.
Weight is between 11 lbs and 12 lbs.
Nearly 30% less than stock.
Can be used on any SOHC vehicle with 1500 engine and 5-Spd transmission.
(Not compatable with 4-Spd vehicles without replacing 5-Spd style ring gear with 4-Spd style gear)
This unit has not been spin balanced, but in our experience, they are OK to install as-is for street use.
If you are building a hot motor that will live at high RPMs, you'll probably want to balance the unit matched to the pressure plate, along with the crankshaft...
Like new !
Freshly milled with re-milled friction surface.
Freshly media cleaned.
Be sure to check the multiple pictures.