Are you looking for:
|
Upper Strut Mount (Fiat Bertone X1/9, Lancia Scorpion/Montecarlo Front and Rear All) - NEW
A high quality rubber strut top plate to fit the front and rear of all Fiat and Bertone X1/9 cars from 1973-88. Also applicable to the front and rear of all Lancia Scorpion / Montecarlo cars and Autobianchi A112.
Manufactured exclusively for Midwest-Bayless, these are SHORE 90 durometer, stiffer than stock vulcanized rubber and will not deform or deflect over time like stock units or "too soft" replacements offered elsewhere.
These usually compress, stretch, or degrade, enabling the car to attain an excess of negative camber, causing uneven tire wear, handling problems or clunking noises in the front or rear suspension.
Condition: NEW
New and unused.
|
Brayden's Choice - Fiberglass Fender Flares Package - FAZA Front / PBS Rear (Fiat Bertone X19 All) - NEW
Give your X1/9 a customized aggressive look with this set of four fiberglass fender flares / arches for all model year Fiat and Bertone X1/9s.
This set is our favorite pairing: Two FAZA style front flares with two PBS style rear flares. Integrates nicely with a stock style series 1 front air dam and widens the car's body by 2.5" on each side for a dramatic new look.
Air dam, front grille, and other items to make the car a "bumperless" style like shown are sold separately.
Click here for information on our Reproduction Series 1 air dam.
They are durable, multi-layer fiberglass-resin construction, very heavy duty, can put up with a lot of abuse, and weigh about 2.5 lbs each!
These can be used for road racing, autocross or street cars and will add approximately 1.75" of additional fender coverage front and rear.
Each flare has a wide flange to allow attachment using rivets or epoxy bonding.
Please note: If you want your wheels and tires to fill out these arches, you will need to cut and remove the arches from your stock metal fenders to allow this. Otherwise, your wide wheels and tires will strike the stock fender arch if the car travels over bumps.
Condition: NEW
New and unused.
|
Auxiliary Shaft Pulley DOHC -w/Rear Lip - Steel LIGHT (Fiat Pininfarina 124, 131, Lancia 2.0L 1980-On) - U8
This is a Factory OE steel auxiliary shaft timing gear for all fuel injected 2.0L engines in Fiat / Pininfarina 124, 131 and Lancia Beta from 7-1979 onward.
Light, 6 hole version with belt lip guard on the inside edge.
Typically considered the "Pininfarina" style of auxiliary shaft pulley, supplied on the last of the 2.0L motors.
Condition: USED (8 of 10)
Clean used condition. No problems or issues.
|
Clutch KIT Cover + Disc + Release Bearing (Fiat Bertone X1/9 5-speed 1500cc, Strada/Ritmo) - NEW
This is a high quality Italian maker complete clutch pack for 1979-88 Fiat and Bertone X1/9s equipped with 1500 engine and 5-Spd transaxle.
Also applied to Fiat Strada/Ritmo.
Includes clutch release bearing.
Applicable to Fiat 128 and Yugo if using an alternate, 1500cc style flywheel.
190mm
Alignment tool is required and available separately.
Application(s):
Fiat X1/9 1500 5speed (1979-88)
Fiat Strada
Condition: NEW
New and unused.
|
TIPO - Thermostat Adapter and Bypass Hose KIT for "TIPO" Big Valve 14-Bolt (Fiat X1/9, 128, Other) - NEW
This is a thermostat adapter and long hose for TIPO style 14-bolt cylinder heads. Allows the installation of an X1/9 or 128 style thermostat on the end of the head.
Includes gaskets and additional required bolt.
Condition: NEW
New and unused.
|