Are you looking for:
|
Bell Housing Flywheel Shield Upper (Fiat Pininfarina 124 Spider Coupe w/5-Spd Manual 1971-On All) - U8
This is an upper transmission bell housing shield plate for all 1971 and later Fiat 124 Spider and 124 Coupe with 215mm clutch and flywheel combination.
For earlier cars, 1968-71 w/1438 and 200mm clutch/flywheel, use 4152482.
Condition: USED (8 of 10).
Very good used condition. Clean and damage free. Ready for install.
|
Auxiliary Shaft Pulley DOHC - w/Rear Lip - Resin (Fiat Pininfarina 124, 131, Lancia 2.0L 1980-On) - U8
This is a lightweight resin auxiliary shaft timing gear for all fuel injected 2.0L engines in Fiat 124, 131 and Lancia Beta from 7-1979 onward.
Typically considered the "FI" style of auxiliary shaft pulley, for use on motors whose upper cam gears do not have belt guides.
Notice the belt lip on the inside of the pulley.
Condition: USED (8 of 10)
Good used condition, no stress cracks on backside, and no saddling of teeth.
|
Relay 5-Pin Normally Open Sipea 0440, 0445, Wepoo 90050, 90040, ValVar 231002, Bosch 332 014 107 - NEW
A 5-pin, normally open relay. Equivalent of Sipea, 0440, 0445, Wepoo 90040 or 90050, and Bosch 332 014 107.
For OE, use PN 4320629.
Condition: NEW
New and unused.
|
Convertible Top Frame Quarter Window Rear Vertical Trim - Right (Fiat Pininfarina 124 Spider) - OE NOS
This is a F/I/A/T Factory OE rear right quarter window glass chrome trim for Fiat 124 Spiders.
This is the leading edge section.
Condition: OE NOS
Original Equipment, New Old Stock.
New and Unused.
|
Radiator Hose - Water Pump to Lower Radiator 125mm / 40mm (Fiat 850 Spider, Coupe 1969-On ) - NEW
This is a high quality Italian maker lower radiator hose that connects between the water pump and the radiator for 1969 on Fiat 850 Coupe and Spider.
Hose has 125mm long leg, with 40mm diameter, to the water pump.
For earlier cars use 4110180 (170mm / 30mm)
Condition: NEW
New and unused.
|