Are you looking for:
|
Brake Caliper - SET - Front Left + Right (Fiat Pininfarina 124, X1/9, 128, 131, Yugo, Scorpion/Montcarlo) - NEW
A pair of brake calipers for front left (driver) and right (passenger) as factory fitted on the following Fiat, Lancia, Pininfarina, and Bertone cars.
These caliper assemblies are top quality units with new precision machined castings.
Application(s):
- Fiat / Pininfarina 124 All (1967-84)
- Fiat Bertone X1/9 5-Spd (1979-88)
- Fiat 128 All (1971-79)
- Fiat 131 / Brava All (1975-82)
- Fiat Strada / Ritmo Series 1 1979-82
- Yugo (except automatic)
- Lancia Scorpion / Montecarlo
- Fiat X1/9 4-Spd (1973-78)
(REQUIRES ALTERNATE 3/8-24 BANJO BOLTS)
No core return required on calipers.
Condition: NEW
New and unused.
|
Interior Rear Quarter Trim Panel RIGHT - Beige (Pininfarina 124 Spider 1983-85 + Fiat 124 Spider 1978-82) - OE
This is a F/I/A/T Factory OE interior trim panel with beige (tan) vinyl covering for the rear seat area of Fiat and Pininfarina 124 Spider cars.
Right side (NA-spec Passenger Side)
Correct factory issue 1983-85 Pininfarina tan/beige is slightly darker in color than in 1978-82 124 Spiders, but is not noticeable when installed in those earlier cars.
Why fuss with trying to paint an aftermarket unit? Get a Factory issue unit in the correct color instead.
Correct factory fitment, construction, and appearance.
Not a painted or plain hard plastic unit like most aftermarket offerings.
Has notch for 3-point seat belt reel as used in 124 Spider cars 1978-on.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Wheel Bearing Retainer Ring - Front/Rear 45mm HEX (Fiat X1/9 4-Spd, 128, Yugo, Lancia Scorpion Front) - LATE-STYLE
This is a Factory OE wheel bearing retainer ring for use on 4-Spd style upright/carrier assemblies in 1973-78 Fiat X19, 128 and Yugo cars.
Used on front and rear upright/carrier assemblies.
===> REQUIRES Axle HUB COLLAR to engage this style of Lockring's "Built-In" SEAL. See attached photo.<===
Do not use with separate V-Ring seal.
Requires small 45mm hex ring tool Part Number 34187) available separately.
Application(s):
Front + Rear wheels:
Fiat X1/9 4-Speed (1974-78)
Fiat 128 All (1971-79)
Front wheels only:
Lancia Scorpion
Montecarlo
Yugo
Condition: OE
Original Equipment New Old Stock
New and unused.
|
Wheel Bearing Retainer Ring - Front/Rear 53mm HEX (Fiat X1/9 4-Spd, 128, Yugo, Lancia Scorpion Front) - EARLY TYPE
A wheel bearing retainer ring for all 4-Spd Fiat X1/9s, all Fiat 128, Yugo, and Lancia Scorpion.
Requires 53mm Hex tool for removal and install, sold separately.
Sometimes referred to as an axle bearing lockring.
60mm OD.
Application(s):
Front + Rear wheels:
Fiat X1/9 4-Spd (1974-78)
Fiat 128 All (1971-79)
Yugo All (w/Manual transmission)
Front wheels only:
Lancia Scorpion
Rear wheels only:
Yugo All (w/Automatic transmission)
Condition: NEW
New and unused.
|
Fender Rear Right Quarter Panel - Repair Patch Panel - Forward Portion (Fiat Pininfarina 124 Spider All) - NEW
This is a patch panel for the right rear (NA-spec passenger side) fender on all Fiat 124 Spider cars.
Fits between fender arch and door. Also known as "rear rocker" area.
Heavy gauge steel with correct fender arch contour. 12" tall.
Condition: NEW
New and unused.
|