A Midwest-Bayless exclusive!
A set of four KONI coil-over struts, FRONT and REAR for any model year Fiat or Bertone X19, for street or competition use.
They feature rugged professional-series KONI 8610 single-adjustable inserts.
A more affordable, yet highly effective alternative to our double-adjustable KONI solutions.
These are the same exact strut designs that we use on the Midwest-Bayless X19 race cars.
With this package you can run any spring rate up to 800lb / inch, and achieve any desired ride-height from stock, to race-car low. Even better, you can also adjust your camber using built in, slotted upper bolt holes. No more fumbling around with awkward and hard-to-adjust camber bolts!
And they include roller bearing steering pivots for the front struts at no extra charge.
The strut housings are custom fabricated from laser cut components and the highest quality DOM steel tubing, 100% tig welded and assembled in the USA.
The struts inside the housings are KONI 8610-1436 single adjustable inserts that allow precision adjustment of rebound damping through a simple turn of the upper (rebound) adjusters. No disassembly required!
All "single-adjustable" struts allow rebound damping to be modified to match the exact spring rate that is used.
A double adjustable strut also allows control of compression damping, which in most simple terms, is an adjustment that can add to the effect of spring resistance at a corner, which is typically unnecessary for street or entry level competition applications.
Threaded aluminum coil over sleeves allow the use of any 2.5" diameter "coil over" spring in 6, 7, or 8" length.
This set is fitted with 200 lb/inch, 7" long springs for the front, and 300 lb/inch, 7" long springs, a perfect compliment for street application with a high horsepower engine such as a built 1500cc or K20 conversion installation.
If you wish to use something other than the springs as supplied, please call or email us prior to ordering. We will offer the strut set minus springs, and subtract $200 from your order.
Compatible with stock upper strut mount or pillow-ball style adjustable camber plates. Upper strut mounts and upper strut mount centering cones as shown in the illustrations are not included with the kit.
New and unused.
We typically have these units in stock for immediate shipment, but may require up to 15 working days for dispatch in certain cases.