Are you looking for:
|
Alloy Wheel Cromodora CD-134 / Speedline "Turbo" 14x5.5 (Fiat Pininfarina 124 Spider 1981-82, 124 Spider Turbo + Other Fiat) - OE NOS
This is a F/I/A/T Factory OE CD-134 / "Turbo" style wheel with traditional black window shadowing. Check the multiple pictures.
These are Cromodora manufacturer.
Originally fitted to 1981/82 Fiat 124 Spider and Spider Turbo, and some early 1983 Pininfarina cars.
Specifications:
4x98 bolt pattern
109mm of backspacing
14 x 5.5" in width
Condition: OE NOS
Original Equipment New Old Stock with original Pininfarina packaging.
One or two very minor scuffs in finish due to 40 years of handling, but otherwise new and unused.
|
Tail Light Assembly - PAIR COMPLETE - Left + Right (Fiat Pininfarina 124 Spider 2000 1979-85) - FACTORY OE ALTISSIMO
This is a PAIR of left + right F/I/A/T Factory OE Altissimo complete tail light assemblies for late Fiat and Pininfarina 124 Spider 2000 cars 1979-on.
These Original Equipment Altissimo assemblies includes the OEM circuit card and OEM body mounting gasket.
Enjoy exact and accurate fit to your car, with snap-in circuit cards, and maximum longevity.
No gaps or voids between the car body and lens assembly, or drilling/riveting in the circuit cards like aftermarket reproductions can have.
Buy the pair and save big!
Condition: OE NOS
Original Equipment New Old Stock.
New and unused.
|
Steering Wheel - 15" Black Leather Assembly w/Hub (Pininfarina 124 Spider 1983-85 + Fiat 124 Spider 1973-82) - OE NOS
This is a F/I/A/T Factory OE steering wheel as fitted to 1983-85 Pininfarina 124 Spider with hub.
It is 15" (385mm) with stitched black leather cover surround as factory issued and factory fitted.
Includes rear mounting factory hub/boss which is 50mm high, the correct OEM thickness for a dished F/I/A/T steering wheel.
Notice that most aftermarket adapters are an additional 25-50mm (1-2") thicker than factory, thus awkwardly moving a typical dished steering wheel uncomfortably close to the driver.
Can be fitted to any 1973-on 124 Spider as a nice upgrade.
Pretty hard to find!
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Steering Column Switch Assembly 3-Pos Lights (Fiat X1/9 1973-78, Fiat 128 All 1973-1979 Euro / World Market, Lancia Stratos) - NEW
A quality made by Vitaloni turn signal assembly switch fitted for the steering column on Fiat X1/9s from 1973-78.
(Three) 3-position turn-signal switch as found in European / World market cars.
(Two) 2-position turn-signal switches are stock equipment in North America market X1/9s.
Also applicable to Fiat 128 1973-79, and Lancia Stratos.
Condition: NEW
New and unused.
|
Brake Caliper Sliding Wedge - PAIR 2x Late-Style (Fiat Pininfarina 124, X1/9, 128, 131, Scorpion/Montecarlo, Yugo) - OE/RENEWED
This is a pair of brake caliper sliding wedges for any model year Fiat 124, X19, 128, and 131 cars. They are used on the front or rear calipers.
This style was supplied on late-model 1984-on cars, with an integral retainer divot. Requires one clip to secure in-place. The longer style ensures straighter travel of the caliper and more even brake pad wear.
Condition: OE/RENEWED
Either OE NOS as supplies permit, or clean used units that have been freshly replated in yellow zinc for maximum corrosion resistance.
|