Are you looking for:
|
Door Glass Outer Rubber Weatherstrip / Convertible Top Trim Scraper 4-Piece KIT (Fiat Pininfarina 124 Spider All) - NEW
This is a rubber window glass scraper seal material for all Fiat and Pininfarina 124 Spider cars.
Flocked inner lining for smooth engagement against the glass.
Kit replaces the scraper material in all four window glass trim pieces:
2x - Door Glass Outer Window Trims
2x - Convertible Top Quarter Window Trims
Condition: NEW
New and unused.
|
Screw M3x8 Throttle Butterfly Fastening Screw (Fiat Pininfarina 124 Spider, Brava, X1/9, Strada, Lancia w/FI 1980-On) - NEW
Factory OE throttle butterfly fastening screw for all fuel injected Fiat and Lancia models including 124 Spider, 131/Brava, X19, Strada and Beta.
Original square / flat head.
Condition: USED (8 of 10)
Good used condition.
|
Fuel Injection ECU (Fiat Pininfarina 124 Spider, Brava 1980-83 + Pininfarina 124 Spider 1983-On) - OE BOSCH NOS
This is a F/I/A/T Factory OE Bosch Germany made fuel injection electronic control unit (ECU / ECM) for fuel injected Fiat Pininfarina 124 and 131 cars.
Bosch "Green Label" ECU ... part number 0280 000 190 (or) 0280 000 222 ... supplied through 09-83.
Does not have provision for an altitude sensor as provided on later cars but can be interchanged to later cars if needed.
Application(s):
Fiat and Pininfarina 124 Spider (1980-83)
Fiat Brava (1980-82)
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Alloy Wheels SET 4x Cromodora CD-19 "Iron Cross" 14x5.5 (Fiat Pininfarina 124 Spider 1982 + All + Other FIAT) - OE NOS
This is a matched set of F/I/A/T Factory OE Cromodora CD-19 "Iron Cross" style wheels as fitted to 1982 Anniversary edition Fiat 124 Spider. Check out the multiple pictures.
Fits any other model year of Fiat or Pininfarina 124 Spider, as well as X1/9, 131, 128, and 850.
Center caps not included.
Very hard to find!
Specifications:
4x98 bolt pattern
109mm of backspacing
14 x 5.5" in width
Condition: OE NOS
Original Equipment New Old Stock.
Very minor blemishes/abrasions to finish from previous handling, but otherwise new and unused.
|
Air Conditioning Compressor Clutch Assembly - Single Groove (Fiat 131, Lancia Beta, through 1978 + Other Italian) - OE NOS
A Factory OE York piston style air conditioning compressor clutch assembly with single pulley for Fiat and Lancia cars through 1978.
Applicable to other Italian cars of the period.
6 1/8" (155mm) OD single pulley.
4 1/2" (114mm) x 3 7/8" (98mm) rectangular mounting flange.
2" (51mm) overall mounting height.
Condition: OE NOS
Original Equipment, New Old Stock.
New and Unused.
|