Are you looking for:
|
Door Handle Lock Tumblers w/Matching Keys (Fiat Bertone X1/9, Ferrari 308, Lancia Stratos, Lamborghini) - OE NOS
This is a Pair of F/I/A/T Factory OE door handle lock tumblers by Cromodora with matching keys for all Fiat and Bertone X1/9, Ferrari 308 GT4, Lancia Stratos and Lamborghini cars.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Kick Panel Pocket Front Right w/Speaker Beige (Pininfarina 124 Spider 1983-85 + All Fiat 124 Spider) - OE NOS
This is a F/I/A/T Factory OE beige (tan) front right kick panel pocket for Pininfarina 124 Spider 1983-85, with a molded area shaped for speaker.
Right front (North America passenger) side.
Includes chromed bright surround around the map pocket.
Correct factory issue 1983-85 Pininfarina tan/beige is slightly darker in color than in 1968-82 124 Spiders, but is not noticeable when installed in earlier cars.
Same size and shape as those used in earlier cars and can be installed in all model year Fiat 124 Spiders.
Why fuss with trying to paint an aftermarket unit? Get a Factory issue unit in the correct color instead.
Sturdier construction than aftermarket / reproduction units and includes a locking design for the chrome trim to prevent loosening.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Upper Strut Mount SET 4x (Fiat Bertone X1/9, Lancia Scorpion/Montecarlo Front and Rear All) - NEW
A SET of four high quality rubber strut top plates to fit the front and rear of all Fiat and Bertone X1/9 cars from 1973-88. Also applicable to the front and rear of all Lancia Scorpion / Montecarlo cars and Autobianchi A112.
4x pieces.
Manufactured exclusively for Midwest-Bayless, these are SHORE 90 durometer, stiffer than stock vulcanized rubber and will not deform or deflect over time like stock units or the "too soft" replacements offered elsewhere.
These usually compress, stretch, or degrade, enabling the car to attain an excess of negative camber, causing uneven tire wear, handling problems, or noise due to contact of upper strut hardware against the body.
Condition: NEW
New and unused.
|
Intake Manifold Vacuum Fitting - 14mm Auxiliary Air (Fiat Pininfarina 124 Spider, 131 1980-On w/FI) - OE / RENEWED
A Factory OE manifold vacuum fitting for Fiat and Pininfarina 124 Spider and 131 cars with FI. Used on the end of the intake plenum for the auxiliary air valve hose.
14mm
Condition: OE / RENEWED
Either Original Equipment New Old Stock as supplies permit, or clean used unit that has been stripped and replated like new in yellow zinc.
|
Axle Hub CV Spindle Stake Nut M24x1.50 (36mm Hex) - Front / Rear (Lancia Beta Coupe, Zagato, HPE, Sedan All) - NEW
A CV-joint / axle / hub nut for all Lancia Beta cars. Also applicable to other Lancia and Fiat versions
36mm hex M24x1.5 with stake flange, applicable to front.
Condition: NEW
New and unused.
|