Are you looking for:
|
Lighter Assembly w/Green Bezel - Late Style (Fiat Bertone X1/9, Pininfarina 124 Spider 1983-On + All) - OE NOS
This is a complete Factory OE lighter assembly for Bertone and Pininfarina cars from 1983-on. Includes green illumination bezel.
Snap-on illumination collar to secure the assembly to the dashboard or console.
Applicable to all model year FIAT cars.
Lighter socket has "modern" depth to fit contemporary lighter chargers and adapters.
Condition: OE NOS
Original Equipment New Old Stock
New and used.
|
Coil Spring Rear Suspension PAIR 2x - 17.75" - SHORTENED (Fiat Pininfarina 124 Spider 1975-85) - RECONDITIONED
Factory OE rear suspension coil spring pair. Applicable to the 1975-85 Fiat and Pininfarina 124 Spider models.
Shortened 1" to reduce height from 18.75 to 17.75 inches.
Condition: RECONDITIONED
A clean used pair of springs which have been careful modified, reshaped to shorten by 1" and painted.
|
Water Temperature Gauge Sending Unit 16mm (Fiat 124, Lancia, Fiat 128, Fiat X1/9 1973-78 + 1987-88) - NEW
A quality European maker temperature gauge sending unit for many Fiat ande Lancia engines.
Read the application list carefully, especially for Fiat SOHC applications.
Application(s):
Fiat 124 OHV 1197cc +1438cc
Fiat 124-series all with DOHC
Fiat 131 / Brava all
Lancia Beta and Scorpion all
Fiat 128 all
Fiat X1/9 1973-78 + 1986-88 with Fuel Injection (1979 to part way through 1986 uses the 14mm version)
Fitted in the cylinder head.
M16 threads.
Reads temperature in head and sends to water temp gauge.
Note: on the Fiat DOHC and Lancia Scorpion head, there are 2 (two) water temperature senders.
Identification on DOHC:
Most always, temp gauge sender has red plastic cap and is located in the rear (firewall side) of head.
Most always, temp light sender has black plastic cap and is located in the front (nose side) of head.
(DOHC temp light sender available as 7588920)
To further confirm identification of required DOHC temperature sender, please check our photos.
Condition: NEW
New and Unused
|
Fuel Injection ECU (Pininfarina 124 Spider 1983-85 + Fiat 124 Spider, Brava 1980-82) - OE BOSCH NOS
This is a F/I/A/T Factory OE Bosch Germany made fuel injection electronic control unit (ECU / ECM) for fuel injected Fiat Pininfarina 124 cars.
Bosch "Yellow Label" ECU ... part number 0280000207 or 0280000222 ... supplied from 09/1983 - 1985.
Has provision for altitude sensor, but can be used on any 1980-85 DOHC engine.
Original Application(s):
Pininfarina 124 Spider (1983-85)
Supported Application(s):
Fiat 124 Spider (1980-85)
Fiat 131/Brava (1980-82)
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Convertible Top Frame Quarter Window Vertical Trim - Fastening Screw - 5mm (Fiat Pininfarina 124 Spider) - NEW
A factory OE flat head fastening screw for the vertical quarter window glass chrome trim on all Fiat and Pininfarina 124 Spiders.
5mm thread, Phillips head.
Measure yours closely. Early cars use 4mm.
Condition: NEW
New and unused.
|