Are you looking for:
|
Exhaust Header - Long Tube w/Sport Muffler Assembly (Fiat Bertone X1/9 1975-On North America All - Including AC!) - NEW
This is a long tube header with stainless sport exhaust muffler for Fiat and Bertone X1/9s.
THIS UNIT IS COMPATIBLE WITH ALL X1/9s WITH RIGHT SIDE EXHAUST, INCLUDING THOSE THAT ARE FITTED WITH FACTORY AC!
Header and exhaust is made in the USA.
This is a 4-1 long tube unit has optimum 2" diameter collector and is mated to a 2" stainless exhaust system featuring a Borla XS stainless muffler with a stainless tip.
For enthusiasts who want optimum exhaust system performance improvement , with a lighter, throatier muffler system.
Exhaust pipe and muffler weigh only 10 lbs, compared to 35lbs for stock OEM system.
Header is made of heavy gauge steel with solid 1/4" one-piece head flange for maximum durability and crack resistance. It is joined to the muffler with a removeable, collar-style flexible union, eliminating squeaky and complex "slip joint".
Includes bung for oxygen sensor with plug.
This item's length is tuned specifically for a 1500cc motor but shows great improvements on 1300cc engines too. In both cases it will give a big increase in low-end torque over a stock down-pipe arrangement.
Please note: Mounting this item will require minor modifications to the manifold flat washers.. We recommend purchasing new, copper tinned manifold nuts and thick washers, available separately. (7x each required).
Condition: NEW
New and unused.
While normally in-stock for immediate shipment, this unit may require up to 10 days for dispatch depending on demand.
|
Fuel Injection Throttle Position Sensor Switch "TPS" (Fiat Pininfarina 124 Spider, X1/9, 131, Lancia) - OE BOSCH
This is a F/I/A/T Factory OE Bosch Germany made throttle position sensor switch on all Fiat and Pininfarina 124 Spider, Fiat and Bertone X1/9s, Brava, and Lancia Beta with fuel injection from 1980-on.
Also referred to as the "TPS".
Bosch part number ... 0280 120 300
Application(s):
Fiat Pininfarina 124 Spider 2000 (1980 California)
Fiat Pininfarina 124 Spider 2000 (1981-85)
Fiat Bertone X1/9 (1980 California)
Fiat Bertone X1/9 1981-88)
Fiat Brava (1980 California)
Fiat Brava (1981-82)
Lancia Zagato Coupe (1981-82)
Condition: OE NEW
Original Equipment.
New and unused.
|
Alloy Wheels SET 4x Cromodora CD-19 "Iron Cross" 14x5.5 (Fiat Pininfarina 124 Spider 1982 + All + Other FIAT) - OE NOS
This is a matched set of F/I/A/T Factory OE Cromodora CD-19 "Iron Cross" style wheels as fitted to 1982 Anniversary edition Fiat 124 Spider. Check out the multiple pictures.
Fits any other model year of Fiat or Pininfarina 124 Spider, as well as X1/9, 131, 128, and 850.
Center caps not included.
Very hard to find!
Specifications:
4x98 bolt pattern
109mm of backspacing
14 x 5.5" in width
Condition: OE NOS
Original Equipment New Old Stock.
Very minor blemishes/abrasions to finish from previous handling, but otherwise new and unused.
|
Fuel Injection ECU (Fiat Pininfarina 124 Spider, Brava 1980-83 + Pininfarina 124 Spider 1983-On) - OE BOSCH NOS
This is a F/I/A/T Factory OE Bosch Germany made fuel injection electronic control unit (ECU / ECM) for fuel injected Fiat Pininfarina 124 and 131 cars.
Bosch "Green Label" ECU ... part number 0280 000 190 (or) 0280 000 222 ... supplied through 09-83.
Does not have provision for an altitude sensor as provided on later cars but can be interchanged to later cars if needed.
Application(s):
Fiat and Pininfarina 124 Spider (1980-83)
Fiat Brava (1980-82)
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Air Conditioning Compressor Clutch Assembly - Single Groove (Fiat 131, Lancia Beta, through 1978 + Other Italian) - OE NOS
A Factory OE York piston style air conditioning compressor clutch assembly with single pulley for Fiat and Lancia cars through 1978.
Applicable to other Italian cars of the period.
6 1/8" (155mm) OD single pulley.
4 1/2" (114mm) x 3 7/8" (98mm) rectangular mounting flange.
2" (51mm) overall mounting height.
Condition: OE NOS
Original Equipment, New Old Stock.
New and Unused.
|