Are you looking for:
|
Steering Column Switch Assembly 3-Pos Lights (Fiat X1/9 1973-78, Fiat 128 All 1973-1979 Euro / World Market, Lancia Stratos) - NEW
A quality made by Vitaloni turn signal assembly switch fitted for the steering column on Fiat X1/9s from 1973-78.
(Three) 3-position turn-signal switch as found in European / World market cars.
(Two) 2-position turn-signal switches are stock equipment in North America market X1/9s.
Also applicable to Fiat 128 1973-79, and Lancia Stratos.
Condition: NEW
New and unused.
|
Air Conditioning Compressor Clutch Assembly - Single Groove (Fiat 131, Lancia Beta, through 1978 + Other Italian) - OE BLEMISHED
A Factory OE York piston style air conditioning compressor clutch assembly with single pulley for Fiat and Lancia cars through 1978.
Applicable to other Italian cars of the period.
6 1/8" (155mm) OD single pulley.
4 1/2" (114mm) x 3 7/8" (98mm) rectangular mounting flange.
2" (51mm) overall mounting height.
Condition: OE NOS w/BLEMISHES
Original Equipment, New Old Stock.
New and Unused
Unit has gotten damp and has a blemished appearance on front side. Groove and back side are perfect, internal bearing OK.
|
Alloy Wheel SET 4x Cromodora CD-134 / Speedline "Turbo" 14x5.5 (Fiat 124 Spider 1981-82, 124 Spider Turbo + Other Fiat) - U8
This is a set of four CD-134 / "Turbo" style wheel with traditional black window shadowing. May be Cromodora or Speedline manufacturer as supplies permit. (both were supplied by FIAT / Pininfarina).
Uses a 4x98 bolt pattern, and is 14x5.5" in width, and 109mm of backspacing.
Originally fitted to 1981/82 Fiat 124 Spider and Spider Turbo, and some early 1983 Pininfarina cars. Check the multiple pictures.
Condition: USED (8 of 10)
Good used condition, minimal marks or abrasions, no obvious dents or dings. Good finish. One wheel has faded black spoke "windows" as shown. Wheels all appear straight and should be able to be mounted as-is. Includes four center caps as shown.
|
Alloy Wheels SET 4x CD-16 "Iron Cross" - PLAIN (Fiat Bertone X1/9, Fiat Pininfarina 124, 850, 128, Lancia Scorpion) - OE NOS
This is a set of four F/I/A/T Factory "Iron Cross" wheels applicable to Fiat and Lancia cars. Check out the multiple pictures.
This style of wheel was made by Speedline and Cromodora and is commonly called the CD-16.
This is a matched set of of four Speedline wheels, with no window shadowing.
Center caps not included, but available separately.
For Fiat or Bertone X1/9, a 185/60-13, 175/65-13 , or any tire size with a rolling diameter under 22 inches is recommended.
For all other FIAT and Lancia cars, 175/70 or 185/70-13 is optimal.
Specifications:
4x98 bolt pattern
110mm of backspacing
13 x 5.5" in width
Condition: OE NOS
Original Equipment New Old Stock
New and unused, as shown.
|
Control Arm Front Lower Pivot Bolt Cup Washer M14x44 (Fiat Pininfarina 124 All) + Sway Bar (Fiat 128, 131, Yugo) - OE / RENEWED
This is a Factory OE washer for the lower control arms on all Fiat and Pininfarina 124 Spider cars. Used to sandwich the lower control arm bushings.
Also used on the front sway bars of Fiat 128, 131, and Yugo cars.
M14 ID, 44mm OD
Condition: OE / RENEWED
Either Original Equipment New Old Stock as supplies permit, or clean used units that have been stripped and replated in yellow zinc.
|