Are you looking for:
|
Quarter Window Rear Horizontal Trim w/Fastening Strip - Right (Fiat Pininfarina 124 Spider All) - OE NOS
This is a F/I/A/T Factory OE right rear quarter window trim piece for all Fiat and Pininfarina 124 Spiders.
Stainless trim with rubber weatherstrip. Includes inner plastic mounting channel 5886247.
This may have additional securing bracket as found on later versions (which prevents the piece from coming loose when the top is closed) as supplies permit.
Use this assembly on 1978-earlier cars to eliminate metal fastening clips that scratch paint.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Marker Light Bulb Holder Pigtail Harness - Rear 2-Wire (Fiat Pininfarina 124, 131 1979-On) - OE NOS
This is a F/I/A/T Factory OE marker light bulb holder and pigtail harness for 1979-on Fiat 124 Spider and 131.
For use with SIEMA marker lights with locking tabs.
Uses modular-style two-wire connectors to connect to tail light circuit board.
Use on left or right side.
Condition: OE NOS
Original Equipment New Old Stock
New and Unused
|
Distributor Temperature Switch 16mm Dual Points Changeover Sending Unit (Fiat 124, 131 1974-78) - OE NOS
A Factory OE Coolant temperature switch. Controls the dual points changeover. M16x1.5 thread.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Distributor Condenser (Fiat DOHC 1438cc 1968-71 w/S124B, Fiat 124 Sed/Wag w/S120, Fiat 850 w/S118) - NEW
This is a high quality Italian manufactured condenser for Fiat 124 Spider / Coupe, 124 Sedan/Wagon and Fiat 850 cars.
Application(s):
Fiat 124 Spider/Coupe w/1438cc DOHC and Marelli S147B distributor
Fiat 124 Sedan/Wagon w/Marelli S120 distributor
Fiat 850 w/Marelli S118 distributor.
Condition: NEW
New and unused.
|
TIPO - Head Gasket SOHC - 1.3/1.5/1.6l - 14-Bolt - 87.2mm / .078 (Fiat Tipo / Tempra, Generac) - PREMIUM
This is a premium quality Italian maker head gasket for 1.6L SOHC Fiat engines as fitted to Tipo and Tempra. Also fitted to Generac power generating stations that were fitted with Fiat 1.6L motors.
"14-bolt head gasket."
Heavy duty gasket with .079 uncrushed thickness.
If fitting a Tipo style performance cylinder head to Fiat Bertone X1/9 1.5L 14-bolt block, use this TIPO-specific gasket.
If fitting a Tipo style head to a Fiat SOHC 1.3 of 1.5 10-bolt block, thread and plug the extra 4 bolt holes in the head and use the appropriate 10-bolt head gasket.
Condition: NEW
New and unused.
|