Cylinder Head SOHC 1.3L (Fiat X19 128 77-78) - REBUILT

This is a complete SOHC 1300 cylinder head assembly ready to bolt on. This particular head is Fiat Part Number 4388928, supplied on 77-78 X1/9s. It contains a single EGR port on the spark plug side. If you have a 74-76 car with air injection emissions, you'll want cylinder head PN 4315419. If you are not concerned about emissions plumbing, this head will fit any 1300 engine.
No junk here, check out the multiple pictures!
We start with a very good condition 1300 head, with all threads / stud holes intact, and clean coolant passages absent of corrosion or enlarged openings. All spark plug and coolant sensor holes have clean threads, and we replace any valve guide whose measurements are out of spec. We mill the head a minimum amount to ensure straightness while leave a good strong platform, and tap the intake manifold coolant holes with a 5/16 x 20 thread so that they can be easily blocked if desired. We also mill the cam box surface a minimal amount to prevent annoying cam-box oil leaks. Then we clean up the valve seats and perform a fresh valve job. We finish it with new valve springs and stock retainers.
Good 1300 heads are getting very difficult to find. Because there are so many possible problems that can be encountered with used aluminum heads, this is an outright sale, and we do not accept cores for a discount or credit. If you can find a fully reconditioned 1300 aluminum head cheaper, they are cutting corners somewhere!
No core return required.