Are you looking for:
|
Steering Column Switch Assembly - North America 2-Position Lights (Lancia Scorpion) - U8
A Factory OE steering column turn signal switch assembly for North American spec Lancia Scorpion / Montecarlo cars.
Please note: This has a 2-position headlights lever switch, (and associated wiring at connectors) and is not directly compatible to European market cars that use a 3-position lights lever switch.
Condition: USED (8 of 10)
Good used condition, nothing broken.
Buy with confidence, 60-day replacement warranty.
|
Alternator 65A Self-Regulated (Fiat Pininfarina 124, 131/Brava 1978-85 + All, Lancia 1975-82) - NEW
This is a 65A alternator for all Fiat 124 and 131, and Lancia Scorpion/Montecarlo cars. Self-regulated, two-wire hook-up as used on 1978-85 cars, with 65A output.
Includes new V-Belt!
Identical geometry as found on earlier Fiat 124 and 131 cars, can be used as an alternator upgrade and eliminate the external, firewall mounted voltage regulator.
For Lancia Beta applications, this unit has Identical geometry, pulley and fan size, however lower pivot holes are slightly different than the OEM alternator and do not use the factory Lancia rubber isolator bushings.
1-year warranty.
Condition: NEW
New and unused.
|
Clutch KIT Cover + Disc + Release Bearing - Thin Style (Fiat X1/9, 128 1975-On 4-Spd) - NEW
This is a high quality Italian maker complete clutch pack for 4-speed Fiat X1/9s (starting 8/1974 (i,e. very last of 1974, and all 1975-78) and 128s (1975-79) equipped with 1300 engine.
Includes clutch release bearing.
Note:
'Thin' style pressure plate style used beginning for the very last month of 1974 production and all 1975 on 1300 X1/9s and 128s with later 4speed transmission bell housings. Not for use on early 1974 and earlier cars.
This change-over occurred in 8/1974, at motor number 2050998.
PLEASE EXAMINE YOUR OLD PRESSURE PLATE CAREFULLY AND COMPARE TO THE PHOTOS HERE BEFORE ORDERING.
Alignment tool is required and available separately.
Application(s):
Fiat X1/9 1300 4speed (8/1974-78)
Fiat 128 All (1975-79)
Condition: NEW
New and unused.
|
Fuel Injector SET 4x (Fiat Pininfarina 124, 131/Brava, Lancia Beta + X1/9) - OE BOSCH NOS
A set of four F/I/A/T Factory OE Bosch Germany made fuel injectors as fitted to injected Fiat Pininfarina 124 Spider, Fiat 131/Brava, and Lancia Beta cars, including Coupe, Zagato and HPE.
Bosch PN 280 150 121.
Original Bosch injector rated at 145cc / minute flow.
Manufactured with exact hose length pre-installed, ready to fit to the fuel rail.
Exact same injector as used on X1/9, just shorten the hose.
Application(s):
Fiat Pininfarina 124 Spider F.I. (1980-85)
Fiat 131 / Brava F.I. (1980-82)
Lancia F.I. Zagato, Coupe , HPE (1980-82)
Fiat Bertone X1/9 (1980-88)
Condition: OE NOS
Original equipment New Old Stock.
New and unused.
|
California Emissions Pollution Control Air Pump Gulp Valve Complete System (Fiat X1/9 1979-80) - NEW
This is a complete Factory OE pollution control emissions system as fitted to 1979-80 Fiat X1/9 California cars. Pulled from a low miles car, it has been confirmed operational. includes:
- Air Pump with V-belt drive
- Gulp Valve
- Thermoswitches and manifold
- EGR Valve and mounting block
- All hoses
- 28/30 DHTA carburetor
Purchase this collection as a spares package and stop worrying about how to maintain your stock, emissions compliant car.
Condition: USED (8 of 10)
Clean used condition.
|