Are you looking for:
|
Door Glass Outer Rubber Weatherstrip / Convertible Top Trim Scraper 4-Piece KIT (Fiat Pininfarina 124 Spider All) - NEW
This is a rubber window glass scraper seal material for all Fiat and Pininfarina 124 Spider cars.
Flocked inner lining for smooth engagement against the glass.
Kit replaces the scraper material in all four window glass trim pieces:
2x - Door Glass Outer Window Trims
2x - Convertible Top Quarter Window Trims
Condition: NEW
New and unused.
|
Ignition Switch (Fiat Pininfarina 124 1978-85 + 1968-77 124 All + 850 Spider All, Coupe 1969-On) - OE SIPEA
This is a F/I/A/T Factory OE SIPEA ignition switch for all 1978-85 Fiat and Pininfarina 124 Spider cars.
Switch includes integral factory, 5-wire main pigtail harness that accepts power in, with switched power and starter circuit outputs. Separate 2-wire door chime connector, rubber shroud, and two OE style keys.
Highest quality, plug-and-play solution for 1977-85 Fiat and Pininfarina 124 Spider cars.
For use on earlier cars, just plug your existing spade terminal connectors into the harness connectors.
note: for earlier 124 cars and those with electric fuel pump, you'll need to double up certain connections.
Same size and shape as used in FIAT 850 spider cars, and applicable in those applications with doubled up wiring connections as well.
We are providing the difficult to find much higher imported cost OE Sipea assembly for Fiat enthusiasts who demand original equipment performance and fitment over and above that of a reproduction replacement grade item.
If you are tired of wasting money on "economy" ignition switches, get yourself a reliable FACTORY OE SIPEA Unit while supplies last.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Fuel Injection ECU (Fiat Pininfarina 124 Spider, Brava 1980-83 + Pininfarina 124 Spider 1983-On) - OE BOSCH NOS
This is a F/I/A/T Factory OE Bosch Germany made fuel injection electronic control unit (ECU / ECM) for fuel injected Fiat Pininfarina 124 and 131 cars.
Bosch "Green Label" ECU ... part number 0280 000 190 (or) 0280 000 222 ... supplied through 09-83.
Does not have provision for an altitude sensor as provided on later cars but can be interchanged to later cars if needed.
Application(s):
Fiat and Pininfarina 124 Spider (1980-83)
Fiat Brava (1980-82)
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Air Conditioning Compressor Clutch Assembly - Single Groove (Fiat 131, Lancia Beta, through 1978 + Other Italian) - OE NOS
A Factory OE York piston style air conditioning compressor clutch assembly with single pulley for Fiat and Lancia cars through 1978.
Applicable to other Italian cars of the period.
6 1/8" (155mm) OD single pulley.
4 1/2" (114mm) x 3 7/8" (98mm) rectangular mounting flange.
2" (51mm) overall mounting height.
Condition: OE NOS
Original Equipment, New Old Stock.
New and Unused.
|
Alloy Wheels SET 4x Cromodora CD-19 "Iron Cross" 14x5.5 (Fiat Pininfarina 124 Spider 1982 + All + Other FIAT) - OE NOS
This is a matched set of F/I/A/T Factory OE Cromodora CD-19 "Iron Cross" style wheels as fitted to 1982 Anniversary edition Fiat 124 Spider. Check out the multiple pictures.
Fits any other model year of Fiat or Pininfarina 124 Spider, as well as X1/9, 131, 128, and 850.
Center caps not included.
Very hard to find!
Specifications:
4x98 bolt pattern
109mm of backspacing
14 x 5.5" in width
Condition: OE NOS
Original Equipment New Old Stock.
Very minor blemishes/abrasions to finish from previous handling, but otherwise new and unused.
|