Are you looking for:
|
Sway Bar KIT Front 22mm (Fiat Pininfarina 124 Spider 1985.5 + All 124 Spider, Coupe) - NEW
A Midwest-Bayless exclusive.
This is a performance 22mm anti-roll stabilizer bar kit for the front of all Fiat 124 series cars, including Spider, Coupe, Sedan and Wagon. Tame that front-end roll in tight turning conditions!
It is shaped to clear the larger radiators in 1979-on cars, and can be installed on any year 124 model car.
It is identical to the much sought-after, improved OE bar fitted to the very last Pininfarina 124 Spider cars built in late 1985.5
The increase in diameter over the smaller bars fitted on all other 124 cars, has an immediate and dramatic effect in controlling body roll. And it does not require changing any other components on the car.
- -19mm diameter (factory issue 1967-85)
- 185 lbs/inch of deflection
- -22mm diameter (factory issue 1985 1/2)
- 276 lbs/inch, 50% stiffer than stock
Beware of 1" diameter bars, which are difficult to fit without modifications, and result in an effective rate that is unusable in street applications.
Kit includes bushings and installation instructions;
- sway bar
- new end bushings (4155685x2)
- new center bushings (4237407x2)
Reuse your existing center and end brackets.
Application(s):
Fiat 124 Spider All (1967-85)
Fiat 124 Coupe All (1967-75)
Fiat 124 Sedan Wagon (1967-74)
Condition: NEW
New and unused.
|
Wheel Bearing Front Inner (Fiat Pininfarina 124 All + 1100/1200/1500, Multipla 1966-on ) - NEW
This is a high quality Italian maker front inner wheel bearing for all Fiat 124 series and 1100,1200,1500, and Multipla models.
Includes bearing and race.
Application(s):
Fiat 124 Spider All (1967-85)
Fiat 124 Coupe All (1967-5)
Fiat 124 Sedan Wagon All (1967-74)
Fiat 1200 and 1500
Fiat Multipla
Fiat 1100
Condition: NEW
New and unused.
|
Speedometer Drive Gear in Transmission for 3.9:1 Diff - 15T (Fiat Pininfarina 124 Spider 1979-1985)
This is a Factory OE transmission speedometer gear for Fiat and Pininfarina 124 Spider cars, 1979-1985.
For use with 15-tooth external speedometer drive unit PN 4199595 to correctly show speed on a 3.9:1 differential.
Condition: USED (8 of 10)
Good used condition.
|
Shifter Extension Housing Assembly - Pull Up Reverse (Fiat 124 Spider Coupe 1968-72 5-Spd) - U8.5
This is a complete shifter extension housing assembly for "early" style Fiat 124 5-Spd transmissions (1968-72).
This is the style that requires pulling UP to engage reverse.
Later cars required pushing down on the handle for reverse.
Includes the housing casting, shifter select rod, shifter cup and spring assy. Requires a shifter handle to be complete.
Condition: USED (8.5 of 10)
Good used condition, cleaned, inspected, no damage.
|
Radius Rod Bracket Bolt 10mm w/14mm Head (Fiat Bertone X1/9, 128, Scorpion/Montecarlo) - OE/RENEWED
This is a bolt for mounting the radius rod bracket to the body of all Fiat and Bertone X1/9s, 128 SL Coupe / 3P, and Lancia Scorpion / Montecarlo
Hard to find 10mm thread bolt with small 14mm head.
Condition: OE / RENEWED
Either Original Equipment New Old Stock as supplies permit, or clean used units blasted and yellow-zinc plated.
|