Are you looking for:
|
Engine Gasket SET SOHC 1500 Carbureted (Fiat X1/9 1979-80 USA + 1979-85 World) - PREMIUM W/SEALS
This is a premium Italian maker full engine gasket set for all 10-bolt 1.5L SOHC carbureted Fiat engines. For North America, these were fitted to X1/9 and Strada (1979-80).
On World Market cars, this applies to all 1500cc 1979-85 with 10-bolt motors and carburetion.
Includes high quality directional seals!
Set is applicable to all 1500 engines with ten head fasteners.
Comes with all standard gaskets required for the top and bottom end of the motor -- including cylinder head gasket -- along with valve stem seals.
Note: This set contains a paper oil pan gasket as used by X1/9s with aluminum oil pans. Thick composite gaskets as used in 128/Strada/Ritmo applications with steel oil pans are sold separately.
Application(s):
- Fiat X1/9 1500 Carbureted 10-Bolt - For North America 1979-80, add thermostat housing gasket for EGR cylinder heads, 4398013 sold separately.
- Strada / Ritmo 1500 Carbureted 10-Bolt: requires thick poly gasket for stamped steel oil pan, 4179038, sold separately.
Condition: NEW
New and unused.
|
Courtesy Light w/Stainless Surround (Fiat 124 Spider Coupe 1968-82, 128 Coupe + Other Italian) - U8
This is a courtesy light with chrome bezel as fitted to the console of all Fiat 124 Spider cars from 1968-82, and other Italian cars of the period.
Has the original stainless steel surround on the light.
Condition: USED (8 of 10)
Good working condition, contacts have been cleaned, lens is clear, chrome is bright, nothing broken.
|
Automatic Transmission Service Gaskets / O-rings Kit (Fiat Pininfarina 124 Spider, 131/Brava) - NEW
This is a comprehensive kit of internal seals, gaskets and O-rings kit for Automatic Transmissions fitted to 1979-On Fiat / Pininfarina 124 Spider, and 131/Brava cars.
includes shifter input shaft rod seal 9921640.
Input seal 9921594 and output seals 40001860 sold separately.
Filter 9921689 sold separately.
Condition: NEW
New and unused.
|
Brake Caliper - Rear 34mm Left (Fiat Pininfarina 124, X1/9, Lancia Scorpion/Montecarlo All) - NEW
A Bayless exclusive new caliper assembly for rear left (driver) of classic FIAT and Lancia applications.
34mm piston, standard handbrake mechanisms, and 8mm metric bleeder.
There is a difference between ours, and the value priced units from the other guys.
NO CORE Return required on calipers.
Calipers are Sold Outright.
Application(s):
Fiat Pininfarina 124 Spider All (1967-85)
Fiat 124 Coupe (1967-76)
Fiat Bertone X1/9 All (1973-88)
Lancia Scorpion Montecarlo All (Replacement for 38mm factory calipers).
Condition: NEW
New and unused.
|
Shifter Extension Housing Assembly - Pull Up Reverse (Fiat 124 Spider Coupe 1968-72 5-Spd) - U8.5
This is a complete shifter extension housing assembly for "early" style Fiat 124 5-Spd transmissions (1968-72).
This is the style that requires pulling UP to engage reverse.
Later cars required pushing down on the handle for reverse.
Includes the housing casting, shifter select rod, shifter cup and spring assy. Requires a shifter handle to be complete.
Condition: USED (8.5 of 10)
Good used condition, cleaned, inspected, no damage.
|