Are you looking for:
|
Arm Rest Left - Black Stitched / Chrome Piping Complete (Pininfarina 124 Spider 1983-On + All, Fiat Bertone X1/9 All, 128) - OE NOS
This is a F/I/A/T Factory OE left-side arm rest, in black stitched covering for 1983 and later Pininfarina 124 Spiders.
Applicable to all model year FIAT and Pininfarina 124 Spider cars, as well as X1/9 and 128.
Includes original chrome piping and chrome upper screw cover cap.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Carburetor Base Plate Insulator Spacer 34/34mm w/Gaskets 10mm Thick - Weber 34 DMSA + ADFA (Fiat 124 Coupe Spider 1974) - RECONDITIONED
This is a 10mm insulator spacer base plate as fitted on 1974 Fiat 124 with Weber 34 DMSA carburetors.
Includes paper gaskets on each side. 10.5mm thick with 35mm venturi holes.
Can be used for other 34 series carburetors as well (i.e. 34 ADFA).
Condition: RECONDITIONED
Clean used units that have been straightened with new gaskets applied.
|
Intake Manifold DOHC Assembly w/ Dual Weber 40 IDF Carburetors, Waffle Manifold and Filters (Fiat 124, 131, Abarth CSA) - OE REFURB
This is a hard-to--find Factory OE waffle intake manifold, with matched original Weber 40 IDF carbs as factory fitted on early Fiat 124 cars.
40 IDF 13 + 40 IDF 15
Applicable to Fiat DOHC engines as fitted to Fiat 124 Spider, Coupe and 131 cars.
Jetted to 2.0L specifications:
55 Idle
125 Mains
170 Airs
F11 Emulsion
80 Bleeds
Includes replacement, sport-style air filters, and 8mm ball synchronized linkage union.
Condition: REFURBISHED
Intake manifold has been media blasted and cleaned. Both carburetors fully rebuilt, including ultrasonic cleaning, new gaskets, accelerator pump diaphragms, needle valve/seat and carb base-to-manifold spacers.
Ready to install and operate.
|
Brake Caliper Sliding Wedge - Early Style - CONVEX FRONT / REAR (Fiat Pininfarina 124, X1/9, 128, 131, Scorpion/Montecarlo, Yugo)) -
A brake caliper sliding wedge for Fiat 124, 128, 131, X1/9, Lancia Scorpion and Yugo. Early (short) style.
Exact OEM thickness.
Curved / Convex style which was introduced by FIAT to reduce surface area friction and allow better floating of the single piston caliper.
Can be used in both front and rear disc brake systems on all years of models above.
Condition: OE / RENEWED
Either Original Equipment New Old Stock as supplies permit, or a reconditioned used unit, freshly bead blasted and replated with yellow zinc for maximum rust resistance.
|
Air Conditioning Compressor Clutch Assembly - Double Groove for Sanden/Sankyo (Fiat 124 Spider 2000, 131 Brava 2L, ancia Beta) - OE NOS
A Factory OE Sankyo / Sanden air conditioning electromagnetic compressor clutch assembly for Pininfarina 124 Spiders, 131 / Brava and Lancia Beta models with 2 liter engines.
Complete with bearing, including hardware!
Condition: OE NOS
Original Equipment, New Old Stock.
New and Unused.
|