Are you looking for:
|
Wing Window Quarter Window Glass Right - NO HOLE / TINTED / North America (Fiat Bertone X1/9 1976-80) - U8
This is a Wing Vent Glass for the right (NA-spec Passenger Side) for early Fiat and Bertone X1/9s from 1976 - 83. It was provided on all X1/9s without the pass-through passenger-side Vittalone side-view mirror.
Condition: USED (8 of 10)
This item is uncracked and unscratched.
|
Fuel Hose High Pressure for Fuel Injection 7.9mm (Fiat Bertone X1/9, 124, 131, Lancia Beta, Strada) - NEW
IMPORTANT NOTICE! - We have chosen to offer this product in 7.9mm (5/16") high pressure hose for Fiat and Lancia L-Jet fuel injection applications, and have removed 7.5mm high pressure fuel hose from our product line-up.
We have done this because of direct experience that 7.5mm hose available on market today will prematurely deteriorate when subjected to high ethanol content.
-------------------
This is high-pressure fuel line compliant with SAE 30R9 / DIN 73379 with 7.9mm ID, suitable for use on all Fiat cars with Bosch Fuel Injection applications.
225psi working pressure with 700psi burst rating.
Please note that this fuel line is .4mm larger in diameter than stock fuel hose, and should not be used with the original "collar-lock" installation process.
Fuel Injection style hose clamps (13-15 size, available separately) are highly recommended to be used at each end of the hose that is being replaced.
Priced PER FOOT.
Condition: New and unused.
|
Clutch KIT Cover + Disc + Release Bearing (Fiat Bertone X1/9 5-speed 1500cc, Strada/Ritmo) - NEW
This is a high quality Italian maker complete clutch pack for 1979-88 Fiat and Bertone X1/9s equipped with 1500 engine and 5-Spd transaxle.
Also applied to Fiat Strada/Ritmo.
Includes clutch release bearing.
Applicable to Fiat 128 and Yugo if using an alternate, 1500cc style flywheel.
190mm
Alignment tool is required and available separately.
Application(s):
Fiat X1/9 1500 5speed (1979-88)
Fiat Strada
Condition: NEW
New and unused.
|
Auxiliary Shaft Pulley DOHC -w/Rear Lip - Steel LIGHT (Fiat Pininfarina 124, 131, Lancia 2.0L 1980-On) - U8
This is a Factory OE steel auxiliary shaft timing gear for all fuel injected 2.0L engines in Fiat / Pininfarina 124, 131 and Lancia Beta from 7-1979 onward.
Light, 6 hole version with belt lip guard on the inside edge.
Typically considered the "Pininfarina" style of auxiliary shaft pulley, supplied on the last of the 2.0L motors.
Condition: USED (8 of 10)
Clean used condition. No problems or issues.
|
Accelerator Cable Sheath / Throttle Linkage Clip (Fiat X 1/9 Series 1, Lancia Scorpion/Montecarlo) - OE NOS
This is a circlip for the accelerator cable and throttle linkages for the Seres 1 X 1/9 1972-78) and Lancia Scorpion/Montecarlo. Used on end of cable sheath, and also on white plastic barrel that affixes cable.
Condition: OE/NOS
Original Equipment/New Old Stock
New and Unused
|