Are you looking for:
|
Cylinder Head DOHC 2.0L Assembly 1980-On FI or Euro Carb (Fiat Pininfarina 124 Spider, 131 1980-on) - REBUILT
This is an 2000 Fuel Injection style DOHC cylinder head assembly, for all Fiat 132-series DOHC engines. Includes new valves, valve springs, retainers, fitted with stock camshafts, and cam housings, correctly shimmed and ready to install.
Casting number 4371507 or 4372297. Equivalent of 4372291 (European spec).
This unit requires the use of an exhaust-cam-driven upright distributor.
Please Note: Stock photo used for this item.
1981-On FIAT DOHC cylinder heads are the most desirable because of improved combustion chamber design and lack of North American pollution control provisions.
This head can be retrofit on any 1800cc or 2000cc Fiat DOHC engine for FIAT 124 Spider / 131 application that does not require pollution control (i.e. air pump, EGR, etc.)
The valves are prepared with competition-level focus to the face and the valve seat, increasing flow significantly over stock. Runners are mildly deburred, and the combustion chamber smoothed.
Condition: REBUILT
Beadblasted and cleaned prior to rebuild. Cylinder head face, and cam box mating surfaces are all milled (5 cuts!) with mirror finish to ensure straightness and end those annoying oil leaks. Most shops don't do that. New valve springs, valves, valve stem seals and camshaft seals are used, with stock style intake/exhaust camshafts.
Please allow 15-20 business days for delivery.
|
Voltage Regulator Bosch (Fiat Pininfarina 124, X1/9 Bertone, 131, Lancia, Strada 1979-On) - OE BOSCH NOS
This is a F/I/A/T Factory OE Bosch Germany made voltage regulator for any Fiat or Lancia fitted with a Bosch alternator, from 1979-On.
Bosch Part Number ... 197 311 005 or 192 052 005 as supplies permit.
This Bosch regulator comes with integral brushes, and fastens directly to the alternator.
Reproduction versions are seriously inferior in both performance and longevity.
Difficult to find.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Convertible Top Frame Quarter Window Vertical Trim - Fastening Screw - 4mm (Fiat Pininfarina 124 Spider) - U8
A factory OE flat head fastening screw for the vertical quarter window glass chrome trim on all Fiat 124 Spiders.
4mm thread.
Measure yours closely. Later cars use 5mm.
Condition: USED (8 of 10)
Good used condition.
|
Instrument Gauge Bracket for Small Body Speedometer / Tach (Fiat 124 Spider 1979-On, 850 Spider / Coupe) - U8
A Factory OE bracket used to secure small body tachometer and speedometer instruments to the dashboard of 1979-On Fiat / Pininfarina 124 Spider, and Fiat 850 cars.
Condition: USED (8 of 10)
Good used condition.
|
CORE Gauge for Gauge Lens Glass - Speedometer / Tachometer (Fiat 124 Spider, Coupe, 850 Spider, Coupe) - CORE
This is a poor condition Speedometer or Tachometer gauge to be used as parts only, specifically for the glass lens.
Condition: CORE
Gauge has not been tested or warranted. Disassemble for the lens glass only.
|