Are you looking for:
|
Marker Light Bulb Holder Pigtail Harness - Rear 2-Wire (Fiat Pininfarina 124, 131 1979-On) - OE NOS
This is a F/I/A/T Factory OE marker light bulb holder and pigtail harness for 1979-on Fiat 124 Spider and 131.
For use with SIEMA marker lights with locking tabs.
Uses modular-style two-wire connectors to connect to tail light circuit board.
Use on left or right side.
Condition: OE NOS
Original Equipment New Old Stock
New and Unused
|
Exhaust Header Assy - Long Tube (Fiat Pininfarina 124 Spider 1980-85 + All w/Converter) - NEW
This is a long-tube exhaust header for Fiat and Pininfaria 124 Spider. The components here are tailored for Fuel Injection application on 1980-on 124 Spider, but can be used on earlier cars as well. Has an integral 02 sensor bung.
2-1 downpipe is mild steel, with dog-leg for catalytic converter fitment as applied in 1975 and later cars.
1 3/4" collector / outlet.
NOTE: The downpipe has an intentional divot from the manufacturer to ensure clearance to the steering linkage. Factory issue downpipes for 1980-85 FI cars have this same exact indentation.
Or, just "roll your own" converter-delete center section pipe back to the exhaust muffler.
Condition: NEW
New and unused.
|
Distributor Temperature Switch 16mm Dual Points Changeover Sending Unit (Fiat 124, 131 1974-78) - OE NOS
A Factory OE Coolant temperature switch. Controls the dual points changeover. M16x1.5 thread.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
TIPO - Head Gasket SOHC - 1.3/1.5/1.6l - 14-Bolt - 87.2mm / .078 (Fiat Tipo / Tempra, Generac) - PREMIUM
This is a premium quality Italian maker head gasket for 1.6L SOHC Fiat engines as fitted to Tipo and Tempra. Also fitted to Generac power generating stations that were fitted with Fiat 1.6L motors.
"14-bolt head gasket."
Heavy duty gasket with .079 uncrushed thickness.
If fitting a Tipo style performance cylinder head to Fiat Bertone X1/9 1.5L 14-bolt block, use this TIPO-specific gasket.
If fitting a Tipo style head to a Fiat SOHC 1.3 of 1.5 10-bolt block, thread and plug the extra 4 bolt holes in the head and use the appropriate 10-bolt head gasket.
Condition: NEW
New and unused.
|
Brake Caliper - SET - Rear 34mm Left + Right (Fiat Pininfarina 124 All, Fiat Bertone X1/9 All) - NEW
A Bayless exclusive set of new caliper assemblies for rear left (driver) and right (passenger) for classic FIAT and Lancia applications.
34mm piston, standard handbrake mechanisms, and 8mm metric bleeder.
There is a difference between ours, and the value priced units from the other guys.
NO CORE Return required on calipers.
Calipers are Sold Outright.
Application(s):
Fiat Pininfarina 124 Spider All (1967-85)
Fiat 124 Coupe (1967-76)
Fiat Bertone X1/9 All (1973-88)
Lancia Scorpion Montecarlo All (Replacement for 38mm factory calipers).
Condition: NEW
New and unused.
|