|
Are you looking for:
|
Arm Rest PAIR - Black Stitched / Chrome Piping Complete (Pininfarina 124 Spider 1983-On + All Fiat 124 Spider, Fiat Bertone X1/9 All, 128) - OE NOS
This is a F/I/A/T Factory OE pair of left and right side arm rests, in black stitched covering, for 1983 and later Pininfarina 124 Spiders.
Applicable to all model year FIAT and Pininfarina 124 Spider cars, as well as X1/9 and 128.
Includes original chrome piping and chrome upper screw cover caps.
For X1/9 use, owners can replace the chromed piping and screw cover with their original black units if desired.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Alloy Wheels SET 4x CD-16 "Iron Cross" - SHADOW WINDOWS (Fiat Bertone X1/9, Fiat Pininfarina 124, 850, 128, Lancia Scorpion/Montecarlo) - RECONDITIONED
A set of "Iron Cross" wheels applicable to most 1965-on Fiat or Lancia cars. This style of wheel was made by both Cromadora as a "CD-16", and by Speedline.
This is a matched set of of four Speedline or four Cromadora wheels as supplies permit, with traditional black window shadowing.
These wheels came in different paint and shadow configurations. If you'd like an alternate black paint inset (or no black inset) no problem! Just let us know prior to ordering.
Check out the multiple pictures. Uses a 4x98 bolt pattern, and is 13 x 5.5" in width, and 102mm of backspacing.
Originally fitted to 83/84 X1/9s, this is the only 5.5 inch 13" alloy wheel Fiat made for the X! Check the multiple pictures. Center caps not included, but available separately.
For Fiat X19, a 185/60-13, 175/65-13 , or any tire size with a rolling diameter under 22 inches is recommended.
Condition: REFURBISHED
These wheels have been professionally reconditioned by a leading wheel repair shop. They have been trued, scratches and scrapes removed, and powdercoated to look like new.
Please allow up to 10 working days for dispatch.
|
Ignition Coil - For Electronic Ignition - MARELLI PLEX 201 (Fiat Pininfarina 124 Spider, Brava, Lancia 1979-On w/Marelli PLEX) - FACTORY OE
This is a F/I/A/T Factory OE MAGNETI MARELLI made in Italy ignition coil for Fiat and Pininfarina 124 Spider, Lancia Beta-series cars, or any Fiat with a Plex 201 conversion ignition.
note: we do not offer the lower quality made in Turkey "licensed by Marelli" reproduction version of this OE ignition coil.
Marelli-Plex ignitions require "breakerless" coil with a very narrow range of characteristics for correct operation.
Exact specifications for your PLEX 201 ignition system.
We are providing the difficult to find higher imported cost OE Marelli Italy coil for Fiat enthusiasts who demand original equipment performance over and above that of a reproduction replacement grade item.
Original Application(s):
Fiat Pininfarina 124 Spider (1979-85)
Fiat Brava All (1979-82)
Lancia Beta-series All (1979)
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Headlight PAIR 2x - 7" / 175mm H4 Incandescent Headlight Kit - 08.500.800 (Fiat, Lancia, Ferrari, Alfa, Lamborghini, Maserati) - GENUINE CARELLO
This is a PAIR (2x ) of genuine 7" H4 headlight assemblies by OE CARELLO made in Italy.
These include globes, bulb holder sockets, bulbs, rear rubber cover and an additional spade style sub-harness.
Supplied on many Italian cars of the period including Ferrari, Maserati, Lamborghini, Alfa Romeo, FIAT and Lancia.
Early 1980s production. European certified, with black anti-glare bulb shield.
Back of unit is identified as 08.500.800
Lens is identified as 08.650.700
100% original manufacture with glass globe and rear reflector.
Condition: GENUINE CARELLO
New and Unused.
|
Ignition Coil - For Electronic Ignition - MARELLI PLEX 201 (Fiat Pininfarina 124 Spider, Brava, Lancia 1979-On, Other FIAT w/Marelli PLEX) - ACCEL
This is an ACCEL Super Stock breakerless ignition coil that is compatible with Marelli Plex 201 style electronic ignitions, as found factory fitted on Fiat Pininfarina 124 Spider, 131, Lancia Beta and other FIAT / Lancia cars.
Marelli-Plex ignitions and their ignition control module require a "breakerless" coil with a very narrow range of resistance specifications for correct operation.
This is the correct unit, and must be used with finned aluminum heatsink.
Includes a logo sticker you can apply if desired.
Original Application(s):
Fiat Pininfarina 124 Spider (1979-85)
Fiat Brava All (1979-82)
Lancia Beta-series ALL (1979)
All FIAT/Lancia Marelli PLEX 201 system
Condition: NEW
New and unused.
|