Are you looking for:
|
Wheel Bearing Front Inner (Fiat Pininfarina 124 All, 1100/1200/1500 Multipla 1966-on ) - OE SKF
Factory OE front inner wheel bearing for all Fiat and Pininfarina 124 vehicles.
Includes bearing and race.
SKF, the highest quality possible.
We are providing the difficult to find higher imported cost OE SKF bearing for Fiat enthusiasts who demand original equipment performance and fitment over and above that of a reproduction replacement grade item.
Application(s):
Fiat 124 Spider All (1967-85)
Fiat 124 Coupe All (1967-75)
Fiat 124 Sedan Wagon All (1967-74)
Fiat 1200 and 1500
Fiat Multipla
Fiat 1100
Condition: OE NEW
Original Equipment.
New and unused.
|
Fuel Injector Mounting Collar Socket Head Screw M5x25 (Fiat Bertone X1/9 1980-88) - NEW/RENEWED
This is a socket head cap screw for fastening the Bosch fuel injector mounting collar on 1980-88 Fiat and Bertone X1/9s. Stock photo used. Only one piece included.
M5x25
Condition: NEW/RENEWED
Either new and unused, or media blasted and freshly replated in yellow zinc.
|
Fuel Injection Fuel Hose KIT - High Pressure (Fiat Pininfarina 124 Spider, 131/Brava 1980-On)
IMPORTANT NOTICE! - We have chosen to offer this product in 7.9mm (5/16") high pressure hose for Fiat and Lancia L-Jet fuel injection applications, and have removed 7.5mm high pressure fuel hose from our product offerings.
We have done this because of direct experience that 7.5mm hose available on market today will prematurely deteriorate when subjected to high ethanol content.
-------------------
This is high-pressure fuel line compliant with SAE 30R9 / DIN 73379 with 7.9mm ID, suitable for use on all Fiat cars with Bosch Fuel Injection applications. 145psi working pressure with 700psi burst rating.
Please note that this fuel line is .4mm larger in diameter than stock fuel hose, and should not be used with the original "collar-lock" installation process.
Fuel Injection style hose clamps (13-15 size, available separately) are highly recommended to be used at each end of the hose that is being replaced.
--------
This is a flexible high pressure fuel line replacement kit for Fuel Injected Fiat 124 and 131 cars from late 1980 on, which uses the correct SAE 30R9 / DIN 73379 with a 7.9mm ID, 2working pressure with 700psi burst rating.
This kit includes:
- 4 x 60mm Fuel Injector Lines
- 1 x 80mm Cold Start Injector Line
- 1 x 230mm Fuel Inlet Line
- 2 x 600mm Bulk Line for Cut-to-Fit replacement of Return and Fuel Pump and Fuel Filter Lines
- 1 x 100mm Fuel Pressure Regulator Vacuum Line
- 8 High Pressure Hose Clamps.
NOTE: 12mm fuel supply hose, from tank to fuel pump, is sold separately. 3 feet is required.
Low-pressure carbureted fuel lines will bulge and weaken under the high-pressure of the fuel pump. A fuel line replacement should be performed on any Fuel Injected Fiat that has more than 75K miles or has the head and injection system off for any reason.
Condition: NEW
New and unused.
|
Bumper Guard Overrider Protective Edging SET 4x (Fiat 124 Spider 1968-73, 850 Spider All) - NEW
This is a soft plastic bumper guard protective edging for Fiat 124 Spider models from 1968-73 with chrome bumpers.
Also applicable to Fiat 850 Spider.
These are cut to length to fit the inside or outside cut-out of the bumper guard.
4 pieces included, enough for two overriders.
Condition: NEW
New and Unused.
|
Fuel Injection Harness Connector 2-Terminal 3-Wire COLD START INJ. (Fiat X19, 124, Lancia) - U8
This is a fuel injection system wiring harness connector for Fiat and Lancia cars with Bosch L-Jet system. This is a two connector unit with blue body for the Cold Start injector with three wires.
Condition: USED (8 of 10)
Good used condition, no cracks or damage to the connector. Includes clip.
|