Are you looking for:
|
Fuel Tank Sending Unit - Carbureted (Fiat 124 Spider 1970-80 + 1968-69, Coupe 1970-75 + 1967-69) - NEW
This is a quality Italian maker fuel tank sending unit for any carbureted Fiat 124 Spider or Coupe vehicle.
Unit has both fuel pick-up and return fittings on the top. Plug the unused fitting for 1969 and earlier cars.
Application(s):
Fiat 124 Spider All w/Carb (1968-80)
Fiat 124 Coupe All (1968-75)
Condition: NEW
New and unused.
|
Auxiliary Shaft Pulley DOHC -w/Rear Lip - Steel LIGHT (Fiat Pininfarina 124, 131, Lancia 2.0L 1980-On) - U8
This is a Factory OE steel auxiliary shaft timing gear for all fuel injected 2.0L engines in Fiat / Pininfarina 124, 131 and Lancia Beta from 7-1979 onward.
Light, 6 hole version with belt lip guard on the inside edge.
Typically considered the "Pininfarina" style of auxiliary shaft pulley, supplied on the last of the 2.0L motors.
Condition: USED (8 of 10)
Clean used condition. No problems or issues.
|
Lug Bolt SET (16x) 27mm 12x1.25 - 17mm HEX for Steel Wheels - BLACK (Fiat 124, X1/9, 128, 131, Yugo) - NEW
This is a complete set of 16 taper-seat lug bolts for fitting stock steel wheels on all Fiat 124, X19, 128 and 131 cars.
12x1.25 with durable BLACK zinc finish.
Grip length is 27mm with 60 degree taper-seat.
17mm hex head.
Please note: These are not for use with later Fiat alloy wheels, as the bolt is too short and will not engage all of the threads in the hub. If mounting alloy wheels, use 33mm grip bolts instead.
Condition: NEW
New and unused.
|
Sliding Sleeve 1st/2nd 3rd/4th Transmission Slider (Fiat Pininfarina 124 Spider Coupe Sedan Wagon All) - OE
A Factory OE (or factory authorized Italian replacement maker) transmission sliding sleeve that actuates either 1st /2nd or 3rd/4th gear for all model year Fiat 124 vehicles with 4-Spd or 5-Spd.
Rebuild your transmission with confidence!
Application(s):
Fiat Pininfarina 124 Spider (1968-85)
Fiat 124 Coupe (1967-75)
Fiat 124 Sedan Wagon (All)
Condition: OE NOS
Original Equipment
New and Unused.
|
Quarter Window Rear Horizontal Trim - Plastic Fastening Strip RIght (Fiat Pininfarina 124 Spider All) - U8
This is a Factory OE plastic inner mounting channel for the right side horizontal bright trim on all Fiat and Pininfarina 124 Spiders.
Slips into the stainless trim.
Use this plastic channel on your 1978 or earlier car to eliminate the metal clips that scratch and damage your paint.
Condition: USED (8 of 10)
Good used condition.
|