Are you looking for:
|
Convertible Top Frame Quarter Window Vertical Trim - Fastening Screw - 5mm (Fiat Pininfarina 124 Spider) - NEW
A factory OE flat head fastening screw for the vertical quarter window glass chrome trim on all Fiat and Pininfarina 124 Spiders.
5mm thread, Phillips head.
Measure yours closely. Early cars use 4mm.
Condition: NEW
New and unused.
|
Convertible Top Quarter Window Rubber Weatherstrip Rear Upper Left (Fiat Pininfarina 124 Spider All) - OE
This is a F/I/A/T Factory OE convertible top rear glass rubber weatherstrip for Fiat and Pininfarina 124 Spider.
Fits the upper portion of the left side glass frame.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Oversize Intake Valve SET 4x - 2.0L DOHC 43mm Oversize (Fiat Pininfarina 124, 131, Lancia w/2.0L ONLY) - NEW
This is a performance set of four high quality intake valves for 2.0L (1979-On ONLY) DOHC engines as fitted to Fiat 124 Spider Coupe, 131 / Brava, and Lancia Beta cars.
43mm valve face. 8mm stem. 106.2mm in length. Round keeper.
These are not recommended for use in 1.8, 1.6 or 1.4L DOHC cylinder heads, as the factory valve seat is not wide enough to accommodate proper contact.
Application(s):
Recommended for use in 2.0L 8-valve cylinder heads ONLY.
Condition: NEW
New and Unused.
|
Water Temperature Gauge Sending Unit 16mm (Fiat 124, Lancia, Fiat 128, Fiat X1/9 1973-78 + 1987-88) - NEW
A quality European maker temperature gauge sending unit for many Fiat ande Lancia engines.
Read the application list carefully, especially for Fiat SOHC applications.
Application(s):
Fiat 124 OHV 1197cc +1438cc
Fiat 124-series all with DOHC
Fiat 131 / Brava all
Lancia Beta and Scorpion all
Fiat 128 all
Fiat X1/9 1973-78 + 1986-88 with Fuel Injection (1979 to part way through 1986 uses the 14mm version)
Fitted in the cylinder head.
M16 threads.
Reads temperature in head and sends to water temp gauge.
Note: on the Fiat DOHC and Lancia Scorpion head, there are 2 (two) water temperature senders.
Identification on DOHC:
Most always, temp gauge sender has red plastic cap and is located in the rear (firewall side) of head.
Most always, temp light sender has black plastic cap and is located in the front (nose side) of head.
(DOHC temp light sender available as 7588920)
To further confirm identification of required DOHC temperature sender, please check our photos.
Condition: NEW
New and Unused
|
Water Pump DOHC - w/Gaskets (Fiat 124 Spider Coupe w/1438cc, 1608cc 1970-72 + Sedan Wagon OHV 1968-73) - NEW
High quality Italian maker full metal construction water pump for Fiat 124 Spider Coupe as production fitted with DOHC engine from 1970-72.
Can be used on earlier Fiat 124 Spider and Coupe (1968-69) to replace the clutch-fan set-up, if an electric fan is fitted instead.
Application(s):
Fiat 124 Spider Coupe 1608cc (1971-72)
Fiat 124 Spider Coupe 1438cc (1970-71)
Fiat 124 Sedan Wagon (1968-73)
Condition: NEW
New and unused.
|