Are you looking for:
|
Quarter Window Rear Horizontal Trim w/Fastening Strip - Right (Fiat Pininfarina 124 Spider All) - OE NOS
This is a F/I/A/T Factory OE right rear quarter window trim piece for all Fiat and Pininfarina 124 Spiders.
Stainless trim with rubber weatherstrip. Includes inner plastic mounting channel 5886247.
This may have additional securing bracket as found on later versions (which prevents the piece from coming loose when the top is closed) as supplies permit.
Use this assembly on 1978-earlier cars to eliminate metal fastening clips that scratch paint.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Relay Socket Connector Holder Block - Individual (Fiat Bertone X1/9 1979-85, + Other Fiat / Lancia) - U8
This is an individual relay connector / mounting socket for relays. These have prongs that allow mounting to a steel bracket and slots that allow them to be connected to other mounting sockets.
If you need a specific color, please indicate this as a Buyer's Note at check-out.
Condition: USED (8 of 10)
Good used condition.
|
Windshield Wiper Post Bezel Nut Chrome (Fiat 124 Spider / Coupe, 850 Spider, Lancia Scorpion) - NEW
This is a chromed nut to secure the wiper post bezel on Fiat 124 Spider and Coupe, Fiat 850 Spider, and Lancia Scorpion cars. Slightly thinner than stock, but is the correct thread pitch and functions / looks correct.
Condition: NEW
New and unused.
|
Distributor Condenser (Fiat DOHC 1438cc 1968-71 w/S124B, Fiat 124 Sed/Wag. w/S120, Fiat 850 w/S118) - OE
This is a Factory OE condenser as fitted to Fiat 124 and 850 model cars.
Application(s)
Fiat 124 Spider / Coupe with 1438cc DOHC engine and Marelli S147B distributor
Fiat 120 Sedan/Wagon with Marelli S120 distributor
Fiat 850 with Marelli S118 distributor
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Brake Caliper - SET - Rear 34mm Left + Right (Fiat Pininfarina 124 All, Fiat Bertone X1/9 All) - NEW
A Bayless exclusive set of new caliper assemblies for rear left (driver) and right (passenger) for classic FIAT and Lancia applications.
34mm piston, standard handbrake mechanisms, and 8mm metric bleeder.
There is a difference between ours, and the value priced units from the other guys.
NO CORE Return required on calipers.
Calipers are Sold Outright.
Application(s):
Fiat Pininfarina 124 Spider All (1967-85)
Fiat 124 Coupe (1967-76)
Fiat Bertone X1/9 All (1973-88)
Lancia Scorpion Montecarlo All (Replacement for 38mm factory calipers).
Condition: NEW
New and unused.
|