Our Price:
$1,489.79
A Midwest-Bayless exclusive!
This is a pair of coil-over struts applicable to the FRONT of all Fiat 128, Strada, Ritmo or Yugo. They feature rugged KONI professional-series 8611 double-adjustable inserts.
Longer in stroke than those provide for our X19 and Scorpion applications, to accommodate the taller ride height on FWD applications.
Give your car an ultimately adjustable suspension upgrade.
With this package you can run spring rates up to 800lb / inch, and achieve any desired ride-height from stock, to race-car low.
Even better, you can also adjust your camber using built in, slotted upper bolt holes. No more fumbling around with awkward and hard-to-adjust camber bolts!
The strut housings are custom fabricated from laser-cut components and the highest quality DOM steel tube, 100% tig welded and assembled in the USA.
The struts inside the housings are KONI 8611-1257 double adjustable inserts that allow precision adjustment of both rebound and compression damping through a simple turn of the upper (rebound) or lower (compression) adjusters. No disassembly required!
All "single-adjustable" struts allow rebound damping to be modified to match the exact spring rate that is used.
A double adjustable strut also allows control of compression damping, which in most simple terms, is an adjustment that can add to the effect of spring resistance at a corner, an invaluable capability for quick, fine chassis adjustment in racing applications.
Threaded aluminum coil over sleeves allow the use of any 2.5" diameter "coil over" spring, 7-10" in length. This set includes 250 lb/inch, 10" long springs, a good street solution.
If you wish to use something other than the springs supplied, please call or email us before ordering. We will offer the strut set minus springs, and subtract $75 from your order.
Also includes radial cage bearing thrust pivots at no additional charge!
Note the photo above shows a 128-style upper strut mount. Ritmo, Strada and Yugo use a different type of upper rubber mount (not included).
Compatible with stock upper strut mount or pillow-ball style adjustable camber plates. Upper strut mounts as shown below are not included with the kit.
Condition: NEW
New and unused.
We typically have these units in stock for immediate shipment, but may require up to 15 working days for dispatch in certain cases.