Are you looking for:
|
Arm Rest PAIR - Beige Stitched / Chrome Piping Complete (Pininfarina 124 Spider 1983-On + All Fiat 124 Spider) - OE NOS
This is a F/I/A/T Factory OE pair of left and right side arm rests, in Pininfarina beige stitched covering, for 1983 and later Pininfarina 124 Spiders.
This is the slightly darker of the beige colors, as supplied on Pininfarina cars.
The color supplied on cars up to 1982 was a bit lighter.
Applicable to all model year FIAT and Pininfarina 124 Spider cars.
Includes original chrome piping and chrome upper screw cover caps.
Hard to find!
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Engine Gasket Set DOHC 2.0L Fuel Injection + All Non-North America Carb (Fiat 124 Spider, Brava, Lancia) - PREMIUM w/SEALS
This is a premium full engine gasket set for all twin cam 2.0L (DOHC) fuel injected Fiat or Lancia engines.
Also applicable to any non North-America 2.0L carb motor. Or 1979-80 2.0L North America engines that have been fitted with alternate 1800 or 2,0L FI cylinder head. (You will have a couple of extra unused gaskets associated with FI application, but all other gaskets and seals are applicable,
Includes high quality, directional engine seal set (crankshaft front and rear, cam shafts, and auxiliary shaft)
Please note for Lancia Beta 1981-On FI applications:
a. distributor housing gasket / O-ring sold separately.
b. Intake manifold gasket is not applicable.
Oil pan and valve cover gaskets may be cork composite or black rubber, as determined by the manfacturer at the time of production.
Application(s):
Fiat 124 Spider 2000 Fuel Injection (1980-85)
Fiat 124 Spider 2000 Carb except North America 1979-On
Fiat 124 Spider 2000 1979-80 fitted with 1800 or 2000 FI cylinder head
Fiat Brava 2.0L FI (1980-82)
Lancia Zagato Coupe Fuel Injection (1981-82)
Condition: NEW
New and unused.
|
Starter DOHC - GEAR REDUCTION Starter (Fiat Pininfarina 124 All, 131 All, Lancia Beta, Scorpion/Montecarlo) - NEW
This is high quality, European maker gear reduction starter applicable to all Fiat and Lancia cars with DOHC engines.
Higher torque and lower current consumption than stock.
Small package makes it a breeze to install, and like the original starters, it includes the integral solenoid.
Weighs nearly 50% less than the original early-style Marelli starter.
Yes, there is a difference between this and the starters offered by others....
Application(s):
Fiat 124 (All)
Fiat 131 (All)
Lancia Scorpion
Lancia Beta (All)
Condition: NEW
New and unused.
|
Performance Cylinder Head DOHC Assembly 2.0L FI / Euro Carb Style Head (Fiat 124 / 131 / Lancia 1979-On + All) - REBUILT
PLEASE NOTE: AT THIS TIME WE MAY REQUIRE YOUR CORE 1980-85 FUEL INJECTED TYPE CYLINDER HEAD IN ORDER TO PRODUCE THIS ITEM. PLEASE CALL FOR ADDITIONAL DETAILS.
This is a performance 2000 FI-style DOHC cylinder head assembly, for all Fiat DOHC 132-series engines. Includes new valves, high performance valve springs, retainers, fitted with performance 35/75 grind (for FI apps) or 40/80 grind (for Carb) camshafts and cam housings, correctly valve shimmed and ready to install.
For LANCIA applications, the specs are the same but proper core cylinder head and valve covers selection is required. Please inquire for these applications so the job can be properly specified.
Notice the size and positioning of the valves, they are larger than earlier 1.8L heads for better flow. Using this head with a set of higher-compression pistons will really wake up your engine.
Includes new oversize 43mm Intake and 37.5mm Exhaust valves, new Isky high-performance valve springs, guides and seals.
Because we use FI-style 1980-later cylinder heads, there are no extra EGR-related items to be plugged or cut-off.
Plus, the FI heads have the largest diameter, best flowing ports available for the DOHC engine.
The valves are prepared with competition-level preparation to the face and the valve seat, increasing flow significantly over stock.
Condition: REBUILT
Beadblasted and cleaned prior to rebuild. Cylinder head face, and cam box mating surfaces are all milled (5 cuts!)with mirror finish to ensure straightness and end those annoying oil leaks. Most shops don't do that. New valve springs, valve stem and camshaft seals.
Please allow 3-4 weeks for delivery.
|
Arm Rest Left - Beige Stitched / Chrome Piping Complete (Pininfarina 124 Spider 1983-On + All Fiat 124 Spider) - OE NOS
This is a F/I/A/T Factory OE left-side arm rest, in Pininfarina beige stitched covering, for 1983 and later Pininfarina 124 Spiders.
This is the slightly darker of the beige colors, as supplied on Pininfarina cars.
The color supplied on cars up to 1982 was a bit lighter.
Applicable to all model year FIAT and Pininfarina 124 Spider cars.
Includes original chrome piping and chrome upper screw cover cap.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|